YarnTwisting Twisting, winding and coating consulting

Yarn count converter

Enter a count in any system and read it in all the others.

tex
dtex
denier
Nm
Ne (cotton)
Nw (worsted)

How yarn count systems work

There are two families. Direct systems give the weight of a fixed length, so a bigger number means a heavier yarn. Indirect systems give the length in a fixed weight, so a bigger number means a finer yarn.

SystemTypeDefinitionFrom tex
texDirectGrams per 1,000 mtex
dtexDirectGrams per 10,000 mtex × 10
denierDirectGrams per 9,000 mtex × 9
NmIndirectMetres per gram1,000 ÷ tex
Ne (cotton)Indirect840 yard hanks per pound590.5 ÷ tex
Nw (worsted)Indirect560 yard hanks per pound885.8 ÷ tex

Plied yarns

This converter works on the resultant count, meaning the count of the whole yarn. For a plied yarn in a direct system, add the singles together: two ends of 1100 dtex give about 2200 dtex before twist contraction. In an indirect system, divide: Ne 30/2 is roughly Ne 15 resultant.

Twist shortens the yarn, so the real resultant count is always a little heavier than the simple sum. The difference grows with twist level, and it matters when you are selling by length.

More calculators

Numbers right but the yarn still will not run?

The sums are the easy part. If the machine is not doing what the calculation says it should, Paul can help find out why.

Send an enquiry