YarnTwisting Twisting, winding and coating consulting

TPM to TPI twist converter

Convert twist between turns per metre, turns per inch and turns per centimetre.

Turns per metre
Turns per inch
Turns per centimetre

The conversion

TPI = TPM ÷ 39.37   and   TPM = TPI × 39.37

There are 39.37 inches in a metre, so a twist in turns per metre is always the bigger number. 400 TPM is about 10.2 TPI.

Common values

TPMTPITPMTPI
601.550012.7
1002.560015.2
1503.880020.3
2005.11,00025.4
3007.61,20030.5
40010.21,50038.1

Why the unit matters on the machine

Older machines and many thread specifications work in TPI. Most modern European and Asian twisters are set in TPM. A setting sheet that does not say which one it means is a common cause of a whole lot being twisted wrongly, so write the unit next to every twist figure.

Twist on the sheet is also nominal twist. The twist actually in the yarn is usually a few percent different because of contraction and slippage, which is why a twist tester check on the first packages is worth the time. See S twist and Z twist explained for direction.

More calculators

Numbers right but the yarn still will not run?

The sums are the easy part. If the machine is not doing what the calculation says it should, Paul can help find out why.

Send an enquiry